Help rendering video in Sony Vegas. MPEG-2 with no sound!

Discussion in 'Professional Video Production' started by catbread.org@gmail.com, May 1, 2007.

  1. Guest

    I'm trying to make a MPEG2 video to be burned with Sony DVD architect.
    So far, I can't get any sound on the rendered video. Is there any
    reason as to why this is happening?

    If there is another way to get the video to import into architect, and
    burn it as a dvd, please help.

    Thanks
     
    , May 1, 2007
    #1
    1. Advertising

  2. Mike Kujbida Guest

    wrote:
    > I'm trying to make a MPEG2 video to be burned with Sony DVD architect.
    > So far, I can't get any sound on the rendered video. Is there any
    > reason as to why this is happening?
    >
    > If there is another way to get the video to import into architect, and
    > burn it as a dvd, please help.
    >
    > Thanks



    I'm assuming that you're rendering using the DVD Architect NTSC video
    stream template (or something similar).
    If that's the case, then you need to render the audio separately,
    preferably as an AC3 stream as this is what DVDA prefers.
    AS long as both files have the same name (i.e. myvideo.mpg and
    myvideo.ac3) and are in the same folder, DVDA will automatically load
    the audio stream for you once you load the video stream.

    Mike
     
    Mike Kujbida, May 1, 2007
    #2
    1. Advertising

  3. Guest

    On May 1, 4:57 pm, Mike Kujbida <> wrote:
    > wrote:
    > > I'm trying to make a MPEG2 video to be burned with Sony DVD architect.
    > > So far, I can't get any sound on the rendered video. Is there any
    > > reason as to why this is happening?

    >
    > > If there is another way to get the video to import into architect, and
    > > burn it as a dvd, please help.

    >
    > > Thanks

    >
    > I'm assuming that you're rendering using the DVD Architect NTSC video
    > stream template (or something similar).
    > If that's the case, then you need to render the audio separately,
    > preferably as an AC3 stream as this is what DVDA prefers.
    > AS long as both files have the same name (i.e. myvideo.mpg and
    > myvideo.ac3) and are in the same folder, DVDA will automatically load
    > the audio stream for you once you load the video stream.
    >
    > Mike


    Thanks mike I'll give it a shot and report back in a few hours!
     
    , May 1, 2007
    #3
  4. Guest

    On May 1, 5:04 pm, wrote:
    > On May 1, 4:57 pm, Mike Kujbida <> wrote:
    >
    >
    >
    > > wrote:
    > > > I'm trying to make a MPEG2 video to be burned with Sony DVD architect.
    > > > So far, I can't get any sound on the rendered video. Is there any
    > > > reason as to why this is happening?

    >
    > > > If there is another way to get the video to import into architect, and
    > > > burn it as a dvd, please help.

    >
    > > > Thanks

    >
    > > I'm assuming that you're rendering using the DVD Architect NTSC video
    > > stream template (or something similar).
    > > If that's the case, then you need to render the audio separately,
    > > preferably as an AC3 stream as this is what DVDA prefers.
    > > AS long as both files have the same name (i.e. myvideo.mpg and
    > > myvideo.ac3) and are in the same folder, DVDA will automatically load
    > > the audio stream for you once you load the video stream.

    >
    > > Mike

    >
    > Thanks mike I'll give it a shot and report back in a few hours!


    Well..I got the AC3 audio rendered, but the sound is off in various
    sections (it changes, it's about a second off in one area, and around
    three in another...)

    Is there any common reasons why this would happen? I'll work with it
    some more and post results within the next few hours.

    Thanks
     
    , May 2, 2007
    #4
  5. Guest

    On May 1, 9:06 pm, wrote:
    > On May 1, 5:04 pm, wrote:
    >
    >
    >
    > > On May 1, 4:57 pm, Mike Kujbida <> wrote:

    >
    > > > wrote:
    > > > > I'm trying to make a MPEG2 video to be burned with Sony DVD architect.
    > > > > So far, I can't get any sound on the rendered video. Is there any
    > > > > reason as to why this is happening?

    >
    > > > > If there is another way to get the video to import into architect, and
    > > > > burn it as a dvd, please help.

    >
    > > > > Thanks

    >
    > > > I'm assuming that you're rendering using the DVD Architect NTSC video
    > > > stream template (or something similar).
    > > > If that's the case, then you need to render the audio separately,
    > > > preferably as an AC3 stream as this is what DVDA prefers.
    > > > AS long as both files have the same name (i.e. myvideo.mpg and
    > > > myvideo.ac3) and are in the same folder, DVDA will automatically load
    > > > the audio stream for you once you load the video stream.

    >
    > > > Mike

    >
    > > Thanks mike I'll give it a shot and report back in a few hours!

    >
    > Well..I got the AC3 audio rendered, but the sound is off in various
    > sections (it changes, it's about a second off in one area, and around
    > three in another...)
    >
    > Is there any common reasons why this would happen? I'll work with it
    > some more and post results within the next few hours.
    >
    > Thanks


    Nevermind, everything seems to working. I was seeking back and forth
    and the video and sound would get incredibly off for some reason.

    Thanks!
     
    , May 2, 2007
    #5
  6. Mike Kujbida Guest

    wrote:
    > On May 1, 9:06 pm, wrote:
    >> On May 1, 5:04 pm, wrote:
    >>
    >>
    >>
    >>> On May 1, 4:57 pm, Mike Kujbida <> wrote:
    >>>> wrote:
    >>>>> I'm trying to make a MPEG2 video to be burned with Sony DVD architect.
    >>>>> So far, I can't get any sound on the rendered video. Is there any
    >>>>> reason as to why this is happening?
    >>>>> If there is another way to get the video to import into architect, and
    >>>>> burn it as a dvd, please help.
    >>>>> Thanks
    >>>> I'm assuming that you're rendering using the DVD Architect NTSC video
    >>>> stream template (or something similar).
    >>>> If that's the case, then you need to render the audio separately,
    >>>> preferably as an AC3 stream as this is what DVDA prefers.
    >>>> AS long as both files have the same name (i.e. myvideo.mpg and
    >>>> myvideo.ac3) and are in the same folder, DVDA will automatically load
    >>>> the audio stream for you once you load the video stream.
    >>>> Mike
    >>> Thanks mike I'll give it a shot and report back in a few hours!

    >> Well..I got the AC3 audio rendered, but the sound is off in various
    >> sections (it changes, it's about a second off in one area, and around
    >> three in another...)
    >>
    >> Is there any common reasons why this would happen? I'll work with it
    >> some more and post results within the next few hours.
    >>
    >> Thanks

    >
    > Nevermind, everything seems to working. I was seeking back and forth
    > and the video and sound would get incredibly off for some reason.
    >
    > Thanks!



    Glad to hear that it worked for you :)
    As far as the sync drift, that's happened to me before as well. Very
    annoying but, as you discovered, nothing to worry about.

    Mike
     
    Mike Kujbida, May 2, 2007
    #6
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Nigel Mackay

    Seperating MPEG to MPEG-video and MPEG-audo

    Nigel Mackay, Aug 29, 2003, in forum: Amateur Video Production
    Replies:
    3
    Views:
    362
    Nigel Mackay
    Aug 30, 2003
  2. Brian
    Replies:
    1
    Views:
    300
    MD Vid
    Oct 23, 2003
  3. DW

    Sony Vegas rendering

    DW, Jun 1, 2005, in forum: Professional Video Production
    Replies:
    0
    Views:
    268
  4. Sony Vegas 7.0b Rendering issue

    , Dec 3, 2006, in forum: Amateur Video Production
    Replies:
    12
    Views:
    4,266
  5. Video Creations

    Premiere 6.5 outputs sound but no video even after rendering

    Video Creations, Nov 20, 2008, in forum: Professional Video Production
    Replies:
    0
    Views:
    407
    Video Creations
    Nov 20, 2008
Loading...

Share This Page