2 problems in D300

Discussion in 'Photography Chat' started by urgyen76, Feb 21, 2009.

  1. urgyen76

    urgyen76

    Joined:
    Feb 21, 2009
    Messages:
    2
    Likes Received:
    0
    Hi guys
    i have two problems regarding my d300 which i just found.

    1) today i wanted to upgrade the Firmware. But it says that the both the firmware numbers available in my camera should be same. which is not the case here. The A shows 1.02 and the B shows 1.00. Can i still upgrade my firmware or do i sent it to Nikon Service??

    2) i cannot set the D300 in low light situation in P, S or A mode(lets say trafic lights or even a black bag.)
    For e.g in "S" mode the display reads 13" f-Lo, "A" mode LO"- f12 and "P" mode LO"-f3.2 but with "M" mode its working it reads 2.5"-f3.2 and is overexposed so i raised my shutter speed to 1.3 and it works
    any suggestion???????
     
    urgyen76, Feb 21, 2009
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.