2X Teleconverter for Panasonic FZ20 Digital camera

Discussion in 'Panasonic Lumix' started by whitebirch1, Jan 28, 2005.

  1. whitebirch1

    whitebirch1 Guest

    Hello....I desparately need some advice on this subject. I jus
    purchased a Panasonic FZ20 and am looking for an inexpensive 2x tel
    converter. Can anyone recommend any specific brands/model #'s tha
    would work on my camera. I am not having much luck. An
    advice/suggestions would be greatly appreciated! Stev
    whitebirch1, Jan 28, 2005
    1. Advertisements

  2. whitebirch1

    Harvey Guest

    Dirk took some shots using a Raynox 2.2x add on to his FZ20:
    http://www.spanburgh.com/Tele_test/ They look pretty nice to me.
    Harvey, Jan 28, 2005
    1. Advertisements

  3. whitebirch1

    Pete Fenelon Guest

    On the FZ10 (I assume the 20 is very similar!), press "MENU", scroll
    down the "REC" menu until you hit page 4, You'll see "CONVERSION" at
    the bottom, enter that dialog, and scroll to either "WIDE" or "TELE" and
    cursor down to accept. You can still manually select the full aperture
    range from f2.8 to f8.0 on either setting. "TELE" limits you to use of
    210-420mm (x6-x12 zoom), and "WIDE" limits you to 35-70mm (x1-x2 zoom).

    Pete Fenelon, Jan 28, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.