Any Durst 184 users here? questions about neg carriers and masks!

Discussion in 'Darkroom Developing and Printing' started by J Burke, Aug 24, 2003.

  1. J Burke

    J Burke Guest

    Using the 184 and CLS 300 head for my 8x10 (and smaller) work and the 205
    glass carrier. My questionis- If using for smaller formats (6x6 and 4x5)
    what type carrier are you usung--the 205 and the 8x10 glass OR the inserts
    from Durst Pro for the appropriate formats. Which is the most cost effective
    solution? I find using the glass (10x10) a pain in the wazoo! Any one doing
    any rigging out there?
    Joseph Burke
     
    J Burke, Aug 24, 2003
    #1
    1. Advertisements

  2. J Burke

    ArtKramr Guest

    Subject: Any Durst 184 users here? questions about neg carriers and masks!
    Yeah. I use Carlwen Rapid shift electron microscope carrioers. Fast and easy.

    Arthur Kramer
    Visit my WW II B-26 website at:
    http://www.coastcomp.com/artkramer
     
    ArtKramr, Aug 25, 2003
    #2
    1. Advertisements


  3. I only have the G139 with it's smaller (13x18) TRINEG glass carrier, but I
    don't think the handling of smaller sizes is a PITA. I looked for tough, thin
    plastic sheets (I use the sheets for transparent copying) and cut a mask for
    4x5, 120 and 135 film. This mask(s) are taped to the lower glass with thin
    scotch tape. Works like a charm.

    Martin
     
    Martin Jangowski, Aug 25, 2003
    #3
  4. I use glass and make a mask with special red tape.
     
    Bruce MacNeil, Aug 27, 2003
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.