ATI Radeon 9200 TV-OUT (interference) - help

Discussion in 'Amateur Video Production' started by Littleberry, Oct 22, 2004.

  1. Littleberry

    Littleberry Guest

    The TV-OUT on my ATI Radeon 9200 (s-vhs) produces something like what
    you get when you are off-channel (using an analog tuner). There is a
    lot of transparant-like interference laid over on top of the picture -
    and the picture
    that does make it to the screen is very poor. I tried 800X600 and
    640X480, as well as 1024X768, all at 60hz, and nothing changed. I
    tried two difference S-vhs cables, with no change. Is there something
    I need to know here to get good TV-out with the radeon 9200? Or is
    this just a low-quality tv-out card? help, Littlerry
     
    Littleberry, Oct 22, 2004
    #1
    1. Advertisements

  2. I would try another device pluged into the same port ont hat TV to see
    what it does before messing around with the card. I have the same card
    and it works pretty well in my PVR. How long a cable do you use? The
    one it came with is about as long as you can get away with without
    interference.
     
    Chris Phillipo, Oct 22, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.