Beta SP Error code 02 594 UVW-1700G

Discussion in 'Professional Video Production' started by anthony, Jan 21, 2006.

  1. anthony

    anthony Guest

    Hi

    A customer I sent a UVW-1700G to is recieving the error 02 594 code.
    Does anyone know what might cause such an issue? I have not seen that
    error at all in my work with Betas.

    I looked up the error code online and got:
    S-REEL FG AND T-REEL FG COULD NOT BE DETECTED WHILE IN SEARCH MODE
    (Neither S reel FG nor T reel FG can be detected in SEARCH mode.)

    The deck was securly packaged with bubble wrap and peanuts inside a box.
    I am only guessing that maybe one of the peanuts might have gotten
    inside as the deck was working before shipping.

    I am not sure what to tell the client. The package was shipped via UPS
    with insurance. Thou I am not sure this would be caused by a damange in
    shipment.

    Any ideas or suggestions would be greatly appreciated.

    thank you

    anthony
     
    anthony, Jan 21, 2006
    #1
    1. Advertisements

  2. If it was working before shipping, my first action would be to guide
    the customer through the process of reseating all the circuit boards -
    it's possible one has come loose during shipping.

    Steve

    The Doctor Who Restoration Team Website
    http://www.restoration-team.co.uk
     
    Steve Roberts, Jan 21, 2006
    #2
    1. Advertisements

  3. anthony

    Vic Thomas Guest


    Error 02s are very common with UVW machines for a number of reasons,
    but in my experience, when they start occuring after the machine has
    been moved it is usualy dry joints on the reel motors. If you check
    the pcb under each reel motor, the connector sockets often show rings
    around the soldered pins.

    Having said that, polystyrene peanuts are NOT a good idea!

    Vic Thomas
     
    Vic Thomas, Jan 21, 2006
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.