Canon 300D (Battery Charger) from US

Discussion in 'Canon' started by Gurrie, Dec 7, 2003.

  1. Gurrie

    Gurrie Guest

    ....what is required for it, more specifically, the battery charger to work
    here.

    Is it a matter of replacing the lead or buying an US -> AU adapter plug.

    Or is the charger voltage specific?

    Has anyone tried this?

    Thanks,


    Craig
     
    Gurrie, Dec 7, 2003
    #1
    1. Advertisements

  2. Gurrie

    nb Guest

    Probably voltage specific but may not be. Buy an adapter from somewhere
    like Dick Smith Electronics.
     
    nb, Dec 7, 2003
    #2
    1. Advertisements

  3. Gurrie

    max morrison Guest

    The input for the Canon BP-511 charger is 100V--240V AC50/60Hz,
    so as far as I'm aware you'll only need an adaptor plug.

    mm
     
    max morrison, Dec 7, 2003
    #3
  4. Gurrie

    Luke Welling Guest

    I bought mine in the US.

    The charger will take from 100-240 volts and has a separate figure eight
    lead with an American plug on it. If you don't have one lying around this
    should cost <$10.

    Luke
     
    Luke Welling, Dec 8, 2003
    #4
  5. Gurrie

    Obake Guest

    its dual 110/220v. all you'll need is a figure8 power cable/lead that you can
    buy from jb's for ~$4. you could get an adapter instead, but i think a new
    lead would be the better option.
     
    Obake, Dec 8, 2003
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.