Canon lide 25

Has anyone got this scanner to work with windows 7 64 bit.

I'm struggling and could with some help



Chris

 

Works fine for me... have you downloaded the Win 7 64-bit drivers from
the Canon site?

Chris (a different one!)

 

Try these:

http://www.canon.co.uk/Support/Cons...x?DLtcmuri=tcm:14-742704&page=1&type=download

and

http://www.canon.co.uk/Support/Cons...x?DLtcmuri=tcm:14-742684&page=1&type=download

They are the latest, and date from 2010. They're the ones I'm
currently using.

Chris.

 

Thank you I have loaded drivers ok, the scanner is seen in devices,
but in the canoscan toolbox my scanner is not seen any ideas ?

Chris

 

Is it attached to a USB port on the PC itself? ISTR they're not very
happy on USB hubs (not even powered ones).

Does it appear under Imaging devices in Device Manager (Control Panel
-> Administrative Tools -> Computer Management -> Device Manager)? Try
'scan for hardware changes'.

Chris

 

Appears under imaging devices in device manager and reports all
working. connected directly to the PC.

When I turn the pc on, the Scanner clicks and the bar moves a little.
its seen by the PC OK , not by the canoscan toolbox or by the scan
program that is part of windows 7.

Chris

 

Hmm - not sure what else to suggest. The clicking and moving on
boot-up is hopeful, as mine does that, too. Oddly, Windows Fax & Scan
doesn't find my scanner, but CanoScan Toolbox certainly does.

The only other thing I can think of is to download the trial version
of Vuescan (www.hamrick.com) - and see if that recognises your
scanner. Again, like CanoScan, it works fine with my scanner.

Chris.

 

What version of toolbox are you using, im trying to use 5.0

Chris

 

The shortcut to mine says it's 4.9 - but whatever, it's what I
downloaded from the Canon when I installed Win 7 64 bit. (And that
was only a couple of months ago.)

Chris.