Canon S900 and Red River

Discussion in 'Photoshop' started by Jasper, Dec 2, 2003.

  1. Jasper

    Jasper Guest

    I have some Polar Ultra Gloss and the profile that goes with it. The output
    is almost right, but the green is a little too vivid. I tried decreasing the
    yellow to -4 in the manual print settings, but it didn't seem to change
    much. Am I on the right track? I don't want to change the monitor settings
    or the image itself but just pull a little green back in printing.
    Unfortunately, I am lost with CMYK which is what the printer software shows
    in the manual settings, which is what you are supposed to use with this
    profile.

    It could be a little off because the profile was written for the PS7 which
    seems to have a "black point compensation" option that I don't have. I am
    still using PS6.

    Thanks, Jasper

    Cross-posted to comp. periphs.printers
     
    Jasper, Dec 2, 2003
    #1
    1. Advertisements

  2. Jasper

    LLutton Guest

    have some Polar Ultra Gloss and the profile that goes with it. The output
    Are you setting the Mode to CMYK? I've always heard printing from CMYK Mode is
    not the way to print.
    Lynn
     
    LLutton, Dec 3, 2003
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.