Cause Canon SD30 to behave like a USB disk drive?

Discussion in 'Canon' started by David Arnstein, Nov 10, 2005.

  1. I just obtained a Canon SD30 camera and I am learning how to use it. I
    have already installed all the PC software that accompanied the
    camera. I don't like it.

    The other digital cameras that I have used all had the property that
    when I connected them to my PC, the PC "saw" the camera as a USB "mass
    storage device." In other words, a disk drive. I prefer this
    behavior. I can use whatever software I want to manipulate photos
    inside the camera (on its SD memory card). I can use Windows explorer,
    command line tools like "CP" and "DEL," and my preferred photo
    software such as Thumbs Plus and Photoshop Elements.

    This is what I would like to do with the SD30. But I can't figure out
    how to do it. When I do the connection camera->cradle->PC, my PC
    "sees" the camera as a "camera", not as a "mass storage device." I
    cannot view, copy or delete images in the camera without launching
    Canon's crappy software.

    Any suggestions?
     
    David Arnstein, Nov 10, 2005
    #1
    1. Advertisements

  2. David Arnstein

    Mark B. Guest

    Use a card reader as others have suggested. Leave it permanently attached
    to the PC, and no worries about the camera batteries going out in the middle
    of an operation.

    Mark
     
    Mark B., Nov 11, 2005
    #2
    1. Advertisements

  3. You can't have exactly what you want. Canon cameras do not emulate a
    USB mass storage device. Period.

    However, if the camera supports PTP, and you're running Windows XP, you
    should be able to use that to access the camera directly.

    Or use Breeze Downloader, which is free.

    Or do what everyone does eventually: buy a USB card reader.

    All 3 choices don't involve using Canon's software.

    Dave
     
    Dave Martindale, Nov 11, 2005
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.