Changing the focusing screen on an eos 630

Discussion in '35mm Cameras' started by piggyme, Jul 1, 2006.

  1. piggyme

    piggyme Guest

    I have bought an Ec-a screen -it didnt come with instructions but did come
    in the original box with the little removal tool.
    Does anyone have any idea where I could instructions for removing the
    screen from an Eos630 (so I can put in the Ec-A) ?

    thanks in advance

    piggyme, Jul 1, 2006
    1. Advertisements

  2. Hi Nav.

    Try a search on Yahoo for a 630 handbook.

    It's quite easy to change screens - hold the tool in your hand and slide it
    under the back edge of the screen's frame then press the trigger to undo the
    latch which holds the screen in place.
    To drop (! well, not quite) the screen into the box (do not touch the screen
    AT ALL) simply put it (still on the tool) into the recess in the box, push
    the too against the back of the screen to free the latch end of the tool
    from the screen and finally take the back end of the tool away.

    There - that should persuade you to do a search. Actually, if you come
    across a handbook for the T90 then you can follow its indtructions. The
    technique and tool are the same and the screens are similar (but NOT


    Fred Anonymous, Jul 3, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.