Digitizing slides and negatives: software to convert the negatives?

Discussion in 'Digital Cameras' started by MB, Jan 14, 2007.

  1. MB

    MB Guest

    I'd like to digitize slides and 35 mm color negatives. My (older) Epson
    scanner isn't equipped for the job, yet it's too good to replace with one
    that can (like an Epson 4490). I like the idea of using a Soligor slide
    duplicator, which has an attachment for negatives (I have a D70). The
    stumbling block for me is handling color conversion of the negatives. I've
    seen references to this being possible with Ulead PI 11 and Adobe PE ("just
    a couple of clicks"), both of which I have, but I can't for the life of me
    find this feature.

    Has anyone out there done this and can tell me if there's software about
    that really can do the conversion easily? Silverfast AI has the NegaFix
    feature--really terrific, but the conversion is done before scanning.

    Thanks in advance.
    MB, Jan 14, 2007
    1. Advertisements

  2. MB

    Cgiorgio Guest

    Dedicated film scanners give far better results than flatbed scanners. If
    you do not already have a slide duplicator and a suitable light source I
    would not consider that an option. Quality will be mediocre (6 MP digicam is
    more like a 2 MP scan because of the Bayer pattern structure on the sensor).
    I would have a look at the Plustek Optic Film 7200 (just Google for it for
    latest info) which comes with Silverfast SE and is available at less then
    200 Euro, at less then 300 Euro with infrared scratch detection / removal.
    The scanner software has preset profiles for different brands / types of
    negative film - something you find in none of the image editors. You can
    find some more info on the www.plustek.com website.
    Cgiorgio, Jan 14, 2007
    1. Advertisements

  3. MB

    MB Guest

    Thanks so much for the info about Plustek. I've looked at the site and will
    consider it. A bit of a shock was the fact that Silverfast's dust/scratch
    removal feature brings the scan of one image to 38 minutes!!

    The Vuescan suggestion is also sound advice. A comparison of Vuescan and
    Silverfast dust/scratch removers showed Vuescan to be far superior.

    Thanks to both posters.
    MB, Jan 14, 2007
  4. I have just finished scanning 3000 negatives on a HP 7890.
    It works well and you can do 30 35mm negs at a time..
    load it and select the settings for each and go away for a couple of hours
    or more at 2400dpi, more at 4800dpi (max optical resolution).
    You don't use 4800 dpi unless you want the grain on the film BTW.
    It will cope with quite a lot of overexposure of negs but there is nothing
    there with a lot of under exposure (the opposite of digital cameras/slides)
    [email protected], Jan 15, 2007
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.