distorted objects in video when using vegas pro's stabiliser

Discussion in 'Amateur Video Production' started by Brian, Jun 2, 2012.

  1. Brian

    Brian Guest

    Sometimes when using the stabiliser in Vegas Pro to stabilise a shaky video
    clip the object in the clip become distorted for a movement. Has others had
    this problem and if so is there a setting in the stabiliser settings to
    prevent this from happening?
    Also is there a way to prevent the stabiliser from cropping the picture
    during the stabilising? I have a feeling that this might not be possible as
    cropping the picture is part of the stabilising process but maybe there is
    a lighter setting so only a small amount of the picture is cropped.
     
    Brian, Jun 2, 2012
    #1
    1. Advertisements

  2. I haven't used the Vegas Pro 11 stabilizer much (or the Pro 10 version
    at all, which may be different), but you are right that to work, it
    must crop (with the amount likely depending on the slider positions
    for the degree of stabilization wanted/acceptable). There is also a
    check box available for including rolling shutter distortion correction.
    --DR
     
    David Ruether, Jun 2, 2012
    #2
    1. Advertisements

  3. Brian

    ushere Guest

    as with david i haven't needed to use the stabiliser, but i did read
    there's a setting that 'zooms' the picture just enough to avoid the
    edges showing in frame...
     
    ushere, Jun 2, 2012
    #3
  4. Brian

    Brian Guest

    While a good photographer should not need to use the stabiliser as his
    shots will be steady in my case I' m editing video that was shot by another
    person as a club project. Most of the time the stabiliser is great at what
    it does but nothing is perfect as they say. I may have to experiment with
    the settings.
     
    Brian, Jun 3, 2012
    #4
  5. Brian

    mike Guest


    Give the original Deshaker (it's free) try.
    http://homepage.ntlworld.com/a.edmiston/deshaker.htm for download and
    instructions.
    http://www.sonycreativesoftware.com/Forums/ShowMessage.asp?Forum=4&MessageID=723105
    for some updated instructions on getting it to work with newer
    versions of Vegas.

    Mike
     
    mike, Jun 3, 2012
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.