Durst Laborator 54 question

Discussion in 'Darkroom Developing and Printing' started by leandronatale, Feb 2, 2005.

  1. Thank you all for the quick replies. The Oto 54 is wonderful, bu
    finding the lensboards are a pain. I found some in Ebay, but I go
    outbid every time. The sad reality is that my wage is not in dollars o
    euros. I have a limit to what I can buy.

    Ritght now, I have located the latub 2, and a Seipla. The problem wit
    both of them is that they have 25mm threads, not 39mm. The othe
    problem is that they are selling each for 150 u$s, which i
    outrageously high for me.

    This is why I am looking for a machinist to do a replica of them
    adjusting the threads to 39mm.

    Well, that's all I can do right now. But you better be sure that I a
    not giving up on my Laborator. I saved my money for two years to bu
    the darn thing
     
    leandronatale, Feb 2, 2005
    #1
    1. Advertisements

  2. The 25mm thread is probably a flat screw-in adaptor from 39mm down to
    25mm this is how my Latub came from its first owner.
    This is absolutely ridiculous. A bit of patience and you should find a
    latub on ebay for about $30.

    best

    Stefan
     
    Stefan Kahlert, Feb 2, 2005
    #2
    1. Advertisements

  3. leandronatale

    f/256 Guest

    check this, Seipla for $35
    http://tinyurl.com/4pkpb

    Never dealt with this company myself.

    Buena suerte!

    Guillermo
     
    f/256, Feb 3, 2005
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.