Dust on sensor.

Discussion in 'Photography' started by Chris, Mar 23, 2006.

  1. Chris

    Chris Guest

    I have recently brought a Nikon D100 the sensor needed cleaning
    beacause of dust. I was wondering does it reduce the amount of
    dust that collects over time if the camera is kept with the sensor
    facing downwards.
    Thanks Chris.
     
    Chris, Mar 23, 2006
    #1
    1. Advertisements

  2. Chris

    Guest Guest


    Probably
     
    Guest, Mar 23, 2006
    #2
    1. Advertisements

  3. That's what I've heard/read -- seems reasonable enough to me.

    Carlos
    --
     
    Carlos Moreno, Mar 23, 2006
    #3
  4. Chris

    Joe Friday Guest

    You should always try and keep the body/lens opening pointed at the ground
    when changing lenses as well as making sure the power is off when changing
    lenses!
     
    Joe Friday, Mar 24, 2006
    #4
  5. Chris

    Stan Beck Guest

    Dust can stay suspended in the air for long periods of time, mostly by air
    currents too small to measure. Dust is attracted to an electrostatic
    charge, even a small residual charge, which is present on all sensors.
    Figure it out.

    --
    Stan Beck
    From New Orleans to Brandon MS

    To reply, remove -101 from address.
    ***
     
    Stan Beck, Mar 24, 2006
    #5
  6. Chris

    Chimper Guest

    Chimper, Mar 25, 2006
    #6
  7. You will still get dust on the sensor, but by pointing down and being fast
    with lense change you won't get as much as fast.

    Get a bulb blower and clean it out every so often.

    Willie
     
    William Saens, Mar 26, 2006
    #7
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.