DV camera "Not Recognised"??

Discussion in 'Amateur Video Production' started by pinfun, Feb 26, 2006.

  1. pinfun

    pinfun Guest

    Anybody had this problem?
    trv-900 sony cpu
    device manager says 1394 port enabled and working
    Tried restarting xp,disconnecting and reconnecting firewire,Ive got
    dvgate and pinnicle and movieshaker and none see a dv connection?Tried
    connecting to my brothers dvd recorder with different firewire..no
    thanks for any helpful ideas
    pinfun, Feb 26, 2006
    1. Advertisements

  2. pinfun

    P.C. Ford Guest

    It is likely the camera. Having this problem with my PD 150. Called
    repair shop. they said might be something insignificant like a bad
    firewire connection on the camera or something very bad. I haven't
    taken the camera in yet.
    P.C. Ford, Feb 26, 2006
    1. Advertisements

  3. pinfun

    webpa Guest

    Could also be impatience. It can sometimes take two-three minutes for
    a TRV900 to be recognized. Same applies to ALL other '1394 devices.
    The sequence of events also matters. i.e.: Power up camera, connect
    '1394 cable, wait...wait....device enumerated...launch capture


    launch capture program...connect '1394 cable...power up
    camera...WAIT...WAIT...device enumerated...go-to-work


    (all other combinations and permutations...BUT DON'T GET IMPATIENT).
    webpa, Feb 26, 2006
  4. pinfun

    August March Guest

    When using Windows XP you should hear some multi-tone (de-do) when the
    system recognizes the camera. Whether the camera is on before you hook-up
    the cable makes no difference. Once the power is on you should hear the
    tones after a bit.

    Always hook-up the camera and have the power on before opening the NLE

    The likelihood the camera is not recognized because of a problem with the
    camera seems remote. Is the firewire card OHCI? Also, when attempting to
    capture you may need to tell the capture module which input you are using.
    You may have some analog setting loaded without realizing it. Ensure you
    have selected 1394.
    August March, Feb 27, 2006
  5. pinfun

    June July Guest

    Main Entry: rec·og·nize
    Function: transitive verb
    Inflected Forms: -nized; -niz·ing
    1 : to acknowledge formally: as a : to admit as being of a particular status
    <recognize a precedent> <recognize a union>; specifically : to acknowledge
    (as a right, cause of action, or defense) as valid b : to admit as being one
    entitled to be heard : give the floor to c : to acknowledge the de facto
    existence or the independence of <refused to recognize the new government>
    2 : to account for as real, received, or incurred and treat and record
    appropriately; specifically : to account for (a gain, loss, expense, or
    income) on current accounting or tax records <recognized the gain when she
    included it as income on her tax return> -compare REALIZE!
    June July, Feb 27, 2006
  6. pinfun

    P.C. Ford Guest

    Not really, at least my PD 150 is doing it. Maybe bad firewire socket
    on camera.
    P.C. Ford, Feb 28, 2006
  7. pinfun

    Cliff Hartle Guest

    Are you putting the camera or dvd recorder into "play" mode?

    My digital still and two dv camorders that I have used all have to be put
    into this mode before the PC finds the device.
    Cliff Hartle, Mar 5, 2006
  8. pinfun

    \R&B\ Guest

    Some video software apps are persnickity about recognizing the camera/deck
    if you try plugging them in once the software is up and running. Plug in
    the cammie/deck first, then launch your NLE.

    Most NLEs have some sort of "Deck/Camera Configuration" thingee you have to
    go through before the software will "see" your playback device.

    \R&B\, Mar 5, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.