DVD Architect (Vegas) - menu audio volume

Discussion in 'Professional Video Production' started by ng598, Jan 25, 2006.

  1. ng598

    ng598 Guest

    I use DVD Architect but cannot find a way of controlling the volume of the
    audio used with the menu, short of using an audio editor to change it. In
    Vegas you can just change the gain of a track, but it seems not in DVD
    Architect. Or as I missing something?
     
    ng598, Jan 25, 2006
    #1
    1. Advertisements

  2. ng598

    Mike Kujbida Guest

    You're not missing anything. DVDA's only function is to create DVDs with
    the information you give it.
    Here's another tip so that your final audio will sound like it did in Vegas
    (due to what Dolby does with the AC3 stream).

    Encode set to AC3;
    Click on Custom tab;
    On the first tab, set diag. norm to" -31";
    On the last tab marked Preprocessing, set the Line Mode Profile
    and RF Mode Profile mode to "none";
    Now save that as a preset.
    I call mine "Stereo DVD Modified".

    Mike
     
    Mike Kujbida, Jan 25, 2006
    #2
    1. Advertisements

  3. ng598

    ng598 Guest

    Mike,
    Thanks very much for that. Much appreciated. The thing is I get my video
    all done in Vegas, but the sound (usually music) for the menu is normally
    put on directly in DVD Architect. But I'll just have to have a little Vegas
    project for the menu sound as well!
     
    ng598, Jan 26, 2006
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.