dvdit pe2.5- build crashes- resolved (in my case)

Discussion in 'Amateur Video Production' started by funsoul, Jul 15, 2003.

  1. funsoul

    funsoul Guest

    Hi Folks,

    Learning how to do the whole dvd thing (lurking like mad
    lately...thanks to folks that post answers!) and ran into a problem
    with dvdit pe 2.5.

    The problem was that whenever building anything, the app would get
    about 75% of the way through and either force reboot or (gadzooks!)
    the BSOD (which I had NEVER seen under win2kprosp2).

    I had set the output and temporary paths to the project drive (d:). It
    crashed as above every attempt. I set the output path to the primary
    hardrive (c:)...fine since.

    Since I either missed (or didn't see) this, thought I'd pass it on.
    -funsoul

    setup- p4 1.4ghz, asus p4t, 512meg rdram, ibm 27g primary, matrox
    g400-tv, hercules s/card, promise ft66, 4x45g maxtor (raid0)
     
    funsoul, Jul 15, 2003
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.