final cut pro 4.5 and Tiger

Discussion in 'Amateur Video Production' started by TheMartian, Jul 24, 2005.

  1. TheMartian

    TheMartian Guest

    anyone having any issues?

    currently I have it loaded, and the POS will not render

    googleing find nothing striking, just the odd person with the same sort
    of issues
    TheMartian, Jul 24, 2005
    1. Advertisements

  2. TheMartian

    Jona Vark Guest

    So sorry to hear that. FCP has had problems with every OS release. I gave up
    on it at 4.5 But .. it may be a good thing that you can not find any info
    about it. You may be the only one with the problem. Which may mean it has
    nothing to do with Tigger. I'll bet there's something else going on there.
    Does this happen with legacy projects or new ones?

    Jona Vark, Jul 24, 2005
    1. Advertisements

  3. TheMartian

    TheMartian Guest

    does it with any project

    always gives me problems especially when deadlines are drawing close :-(

    maybe its time to look at alternative NLEs

    what are you using inplace of FCP?
    TheMartian, Jul 24, 2005
  4. TheMartian

    rebus Guest

    I have no problems, but I installed FCP after
    I upgraded to 10.4. If you did it the other way
    around you may have a preference or permissions
    rebus, Jul 25, 2005
  5. This is my experience as well.

    Upgraded to 10.4 - then installed FCP 5 and the two projects currently
    in house - (interestingly both are 2+hour multi-camera live shows capped
    in offline RT to try out the new Multicam FCP implementation) are going

    No software or hardware issues so far.

    Tho I *did* have to resort to the manual to learn the pecularities of
    William Davis, Jul 25, 2005
  6. TheMartian

    Antony Lacey Guest

    I did - a re-install of FCP sorted it. Tiger killed off Motion 1
    completely for me, I never did get it working with Tiger.
    As someone else pointed out, FCP doesn't seem to like having Tiger
    installed aftwerwards (which is the onle way it's going to happen

    I was upgrading to FCP 5 anyway, just had to wait a couple of weeks to
    get that, but FCP 4.5 did work on TIger after re-installing it, and
    worked as well as it had before.
    Antony Lacey, Jul 25, 2005
  7. TheMartian

    Antony Lacey Guest

    I would agree, I have had no problems with FCP 5 as yet, and I have done
    two projects with it, one 90 minutes long, and one 4 minutes long - but
    with over 3 hours of source material (including a 3 camera interview).
    Seconded, it fixed the issue of no HDV import from my Sony FX1E.
    It is a bit odd to begin with - I downloaded a clip from the Apple site
    about multi-cam editing which helped me to pick it up quickly.

    But multicam editing is what I have been after for a long time, and this
    works well.

    My current project involves a 3 camera shoot for most of it, and a small
    part of it will be a 6 camera shoot. The editing so far has been very
    easy, and this is one a very small budget. FCP 5 has performed well, and
    continues to do so.
    Antony Lacey, Jul 25, 2005
  8. TheMartian

    TheMartian Guest

    hmmm, interesting, I did a clean install of both Tiger and FCP

    going to try killing the .plist and see what happens
    TheMartian, Jul 25, 2005
  9. TheMartian

    TheMartian Guest

    thanks for the help, did the deed today and finally got FCP5 ordered
    TheMartian, Jul 25, 2005
  10. TheMartian

    Jona Vark Guest

    I hated FCP so much I haven't turned it on in a year or more. I am cutting
    everything with Premiere Pro. It is vastly more cooperative than Final Klutz
    and about 5 times faster at EVERYTHING.
    Jona Vark, Jul 25, 2005
  11. TheMartian

    Jona Vark Guest

    That's sad. YOu had to upgrade in order to be able to render. If I were you
    I would give the numbnuts at Apple a piece of my mind. They're so busy
    making cheapo MP3 players .. they may not have time to listen to you.
    Jona Vark, Jul 26, 2005
  12. TheMartian

    TheMartian Guest

    was going to update anyway, just did it sooner than planned
    TheMartian, Jul 26, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.