FS - SEAL 210 Laminating press - Mat Press

Discussion in 'Darkroom Developing and Printing' started by RM, Apr 29, 2005.

  1. RM

    RM Guest

    I have a GOOD condition Seal 210M dry mount and laminating press. The Seal
    210M press is a tabletop, heat activated dry mounting system. It utilizes
    uniform heat and pressure to mount, laminate and texturize prints on
    substrates up to 1" thick. Develops up to 1200 lbs. of pressure on its
    adjustable 18.5x 23"(47x58cm) platen and can handle virtually any size job
    from a 3 1/2 inch print all the way up to work 36"(91cm) wide by any length.

    A free-floating platen seats the work without shifting and provides uniform
    pressure across the entire surface. The temperature range is from 150-350F
    degrees. There is a non-stick surface on the platen. Comes with a direct
    temperature readout for precise control. 115v, 11.3amps, 1350w. Dimensions:
    27x23x11"(WDH)(20"high open) shipping weight is 75 lb.(34kg).

    The press is in good working order



    Photos available on request

    Will sell for $500

    Located in Jackson NJ .. WILL NOT SHIP



    Contact Rich at
     
    RM, Apr 29, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.