Heidelberg Linoscan 1450 sparepart and driver for Windows?

Discussion in 'Scanners' started by Patrick, Jan 30, 2005.

  1. Patrick

    Patrick Guest

    I acquired a new condition Scanner
    Heidelberg model Linoscan 1450/ ELS3000
    with no documentation or drivers. Should have checked first...

    Could someone help me to an operating manual? best in electronic form by
    email or allow me to photocopy it?

    There is a connector on the lid and one on the base as well. I think a cable
    should connect both parts however the cable is missing.

    I would appreciate very much is someone could point me to a source of a
    replacement cable or a wiring description of the cable and the windows
    driver software.

    Thanks for any help. Much appreciated.

    Patrick
     
    Patrick, Jan 30, 2005
    #1
    1. Advertisements

  2. Patrick

    Patrick Guest

    I have it working using silverfast, what a fine scanner.
    The only thing I need is the cable between the transparancy scanning lid and
    the base unit.
    Even only the connection diagram of the cable would be of great help, I can
    make the cable myself.
    Here is how the helping hand can start:
    pin 1 of the DB25 connector of the connector to the transparancy unit is
    connected to pin xx of the connector to the base unit
    pin 2 of the DB25... etc..
    There are 25pins to be defined.
    You could use a simple ohmmeter to check. or a battery, a lamp and 2 test
    wires.
    Please advise if you want to help.
    Thanks and best regards,

    Patrick
     
    Patrick, Feb 1, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.