HELP: Acerscan Prisa 620st

Discussion in 'Scanners' started by Winston, Aug 6, 2005.

  1. Winston

    Winston Guest

    Hope someone can helop me out again.
    I have the Prisa 620ST scanner and I recently got an Adaptec AVA-2902E/I
    SCSI Controller 25 pin PCI Adapter card.
    My scanner cannot be detected by the scanning software. I am wondering what
    am I doing wrong here. I think that with this card, there must be
    termination but how do I do this. The cable I am using has both ends 25 pin
    male and the connector of the card is a 25 pin female. The scanner itself
    has no termination switch or jumper so how do I get this thing to work? Am I
    using the wrong card?
    Pls help me out here someone. I would greatly appreciate any advice. Can I
    still use this card or do I have to get a card dedicated to uuse on this
    particular scanner?

    Thank you in advance
    Winston
     
    Winston, Aug 6, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.