Kodak 6000 camera dock problems

Discussion in 'Kodak' started by John Fonhof, May 27, 2004.

  1. John Fonhof

    John Fonhof Guest

    --
    To Reply:
    Remove the part -RemoveThis- in my email address

    I have a Kodak 6330 camera and also the Kodak 6000 camera dock
    Printing out pictures made with my own camera works fine
    Any other pictures seem to print out with part of the top and bottom
    missing

    JF
     
    John Fonhof, May 27, 2004
    #1
    1. Advertisements

  2. John Fonhof

    Ron Baird Guest

    Hi John,

    That is likely due to the settings and formats 4:3 or 3:2. At 3:2 the
    prints will come out normally on a 4x6 size sheet of paper. If you print an
    8x10 however, then you will want to switch to the 4:3 settings, which gives
    you a more complimentary format for that ratio. Give it a try. There are
    several camera manufacturers that allow for this feature.

    You can set your camera to one or the other of the formats. The reference
    page for this setting follows.

    1. In any Still mode, press the Menu button.
    2. Press to highlight Quality , then press the OK button.
    3. Highlight an option:

    Best (3.1 MP)-for printing up to 11 x 14 in.(28 x 36 cm); pictures are
    highest resolution and largest file size. appears in the status area.
    Best (3:2) (2.8 MP)-for printing up to 11 x 14 in. (28 x 36 cm); ideal for
    printing to the Kodak EasyShare printer dock 6000 and other printing
    solutions (see Printing Pictures From Your Computer); optimal setting for 4
    x 6 in. (10 x 15 cm) prints. appears in the status area.
    Better (2.1 MP)-for printing up to 8 x 10 in. (20 x 25 cm); pictures are
    medium resolution with smaller file size. appears in the status area.
    Good (1.1 MP)-for emailing, Internet, or screen display; pictures are
    lowest resolution and smallest file size. appears in the status area.

    4. Press the OK button.
    5. Press the Menu button to exit the menu.
    This setting remains until you change it.

    Let me know if you have questions.

    Ron Baird
    Eastman Kodak Company






    Depending on the printer and settings you are using. For example,
     
    Ron Baird, May 28, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.