Kodak BW400CN film and Multigrade RC

Discussion in 'Kodak' started by Dauphin Vert, Mar 31, 2006.

  1. Dauphin Vert

    Dauphin Vert Guest

    hello,
    are you aware of any special difficulties which may arise when
    using Multigrade RC paper for making prints from a BW400CN film ?
    As recommended by Kodak, the filter shall be n° 4 or 4 1/2.
    thanks for any advise.
    Martin
     
    Dauphin Vert, Mar 31, 2006
    #1
    1. Advertisements

  2. Dauphin Vert

    Rod Smith Guest

    I've had no real problems printing Kodak's chromogenic film on multigrade
    RC papers (mostly Agfa MCP 310 RC), except for one frame that was badly
    underexposed and probably wouldn't have printed well if I'd used a
    conventional B&W film. I had to max out the contrast on that one. Most
    frames seem to print well with an effective contrast of 2.5-3, in my
    experience. Of course, your preferences might differ or you might need
    different settings with your enlarger/filters or paper.
     
    Rod Smith, Mar 31, 2006
    #2
    1. Advertisements

  3. Dauphin Vert

    Neal Currie Guest

    the 4 or 4.5 is correct. ive found the exposure also needs to be longer
    when printing through C41 film.
     
    Neal Currie, Mar 31, 2006
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.