kodak camera dock

Discussion in 'Kodak' started by Rick, May 2, 2004.

  1. Rick

    Rick Guest


    Can any one advise me on were to send a Kodak camera dock in for repair? I
    have emailed Kodak's site 2 with no response?

    TIA Rick
    Rick, May 2, 2004
    1. Advertisements

  2. Rick

    Ron Baird Guest

    Hi Rick

    Yikes, sorry you did not get a response. That sure is not the Kodak way. I
    checked our systems and did not find your email address? You likely used
    another. Regardless, I suggest you call the following phone number - our
    online experts can help get your dock in for review and service. If you
    only need the address I can provide as well. Let me know.

    800 235-6325

    Good luck, if you have questions let me know and I will follow through with

    Ron Baird
    Eastman Kodak Company
    Ron Baird, May 5, 2004
    1. Advertisements

  3. Rick

    Rick Guest

    Thanks. I called it today and got the address information.

    Appreciate your time and help
    Rick, May 7, 2004
  4. Rick

    Paige Miller Guest

    On Stardate 5/5/2004 5:43 PM, the following keys were mysteriously typed
    at Ron Hunter's keyboard...
    Usually, the camera flashes for a few minutes after transfer to indicate
    that the USB connection is still active -- which means that your
    computer can see the camera as another disk drive. You say there is no
    need for the camera to remain on -- for you perhaps this is true, for
    others it is not true. Anyway, I know of no way to stop this flashing
    other than removing the camera from the dock.

    Paige Miller
    pmiller5 at rochester dot rr dot com

    It's nothing until I call it -- Bill Klem, NL Umpire
    If you get the choice to sit it out or dance,
    I hope you dance -- Lee Ann Womack
    Paige Miller, May 8, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.