Kodak easyshare digital camera C310

Discussion in 'Kodak' started by Bridget Ann Ferrazzano, Aug 17, 2009.

  1. Hello,
    If this is the wrong group for this, please let me know. We have a Kodak
    easyshare digital camera model C310 which will not turn on. It will work
    okay when connected to the printing dock but batteries will not recharge
    and the camera is not really working when running on the batteries
    Any help would be appreciated. Thank you.
    Bridget Ferrazzano
     
    Bridget Ann Ferrazzano, Aug 17, 2009
    #1
    1. Advertisements

  2. Bridget Ann Ferrazzano

    ray Guest

    Sounds to me like it needs new batteries.
     
    ray, Aug 17, 2009
    #2
    1. Advertisements

  3. Thank you for your reply. I have installed new rechargeable batteries.
    As far as I know, they are the correct type of batteries for this camera,
    I have tried to recharge the batteries but they don't seem to be
    recharging. Is there something going on with the camera itself, maybe it
    needs to be repaired?
    Thank you for any ideas.
    Bridget Ferrazzano
     
    Bridget Ann Ferrazzano, Aug 17, 2009
    #3
  4. Buy new batteries - they're cheap enough!
    Regards Mike.
     
    Mike Cawood, HND BIT, Aug 17, 2009
    #4
  5. You need to put the batteries in an external battery charger for the type of
    battery you have. On many cameras, the USB connection doesn't charge that
    batteries, it only powers the camera. You can get battery chargers for AA
    size NiMH batteries from a supermarket & they aren't expensive.
    You need 2 x AA size NiMH batteries of at least 1700mAH capacity and a NiMH
    charger for the AA NiMH batteries. Many Kodak cameras are not compatible
    with alkaline batteries, unfortunately.
    If it still won't charge, buy a decent digital camera such as a Fujifilm or
    a Samsung.
    Regards Mike.
     
    Mike Cawood, HND BIT, Aug 17, 2009
    #5
  6. Bridget Ann Ferrazzano

    ray Guest

    I'd try an external charger first. Charge the batteries externally, put
    them in the camera and see if it works. If so, then problem is probably
    with the chargind circuit in the dock - if not then more likely in the
    camera.
     
    ray, Aug 17, 2009
    #6
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.