Linux and Fuji Finepix 3800 / S304

Discussion in 'Fuji' started by -, Sep 14, 2003.

  1. -

    - Guest

    Here's how I did it on my Redhat 9 machine...

    1. Edit /etc/fstab to include the line-

    /dev/sda1 mnt/fuji vfat noauto,owner,ro,user 0 0

    2. Create the mount point mnt/fuji

    3. With the camera turned on you can now execute the following command-

    mount /mnt/fuji

    That's it! Now you have full access to the images.
     
    -, Sep 14, 2003
    #1
    1. Advertisements

  2. -

    - Guest

    There may well be a way to do it in Linux as you have described, I was
    merely passing along the way that *I* do it to those that have an
    interest in such things. It isn't as hard as it looks. Once this little
    procedure has been completed once, thereafter only the "mount /mnt/fuji"
    part need be done again whenever the camera is connected. It takes mere
    seconds.

    Linux is a very potent operating system and for those that take the time
    to get to know it, very satisfying. Think of it as a very high end SLR,
    with MacOS being more of the point and shoot variety. An imperfect
    analogy, but I'm sure you get the idea. Both have their place.
     
    -, Oct 26, 2003
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.