Linux Pinnacle 50e PCTV USB2

Discussion in 'Amateur Video Production' started by rjm, Jan 23, 2006.

  1. rjm

    rjm Guest

    Fedore Core 3 kernel 2.6.10-1.770_FC3 with a Pinnacle 50e PCTV
    USB2....it's recognized by the em28xx driver.

    T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 5 Spd=12 MxCh= 0
    D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=2304 ProdID=0208 Rev= 1.00
    S: Manufacturer=Pinnacle Systems GmbH
    S: Product=PCTV USB2 NTSC
    ....
    I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=em28xx
    ....


    modules are loaded:
    ....
    em28xx 46000 0
    v4l1_compat 12292 1 em28xx
    v4l2_common 7424 2 tuner,em28xx
    ir_common 26756 1 em28xx
    tveeprom 14360 1 em28xx
    ....
    usbvision 68772 0
    i2c_algo_usb 4612 1 usbvision
    i2c_core 20801 7
    tda9887,tuner,saa711x,em28xx,tveeprom,i2c_i801,i2c_algo_usb
    videodev 9537 3 em28xx,pwc,usbvision
    ....


    It's on /dev/video1....

    I've tried xawtv, mplayer and tvtime. All just give me a green screen.
    With tvtime I at least get what looks like a thick line of fuzz up top
    on some channels. I've tried the composite input with a vcr connected
    as well and same thing...just a green screen.

    Suggestions? Anyone? Anyone at all?
    thanks.
     
    rjm, Jan 23, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.