Minolta Z1 power supply and polarity

Discussion in 'Minolta' started by Karen Marshall, Jan 3, 2004.

  1. Hi folks,
    I asked a while ago in another thread about the polarity of this supply so
    that I could use a generic one. After a bit of work on the camera with a
    multimeter I finally answered my own question.
    The supply voltage is 6 volts - which is written in the manual anyway.
    The polarity of the plug is Centre Positive.

    The plug is a standard EIJ type with dimensions 4.0mm OD and 1.7mm ID.
    (I picked up one from Tandy/Radio Shack - cat# 273-1705 since I'm currently
    on the other side of the planet holidaying.)

    Hope someone finds this helpful.

    Cheers, Craig Bailey
     
    Karen Marshall, Jan 3, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.