MSI @nywhere master TVcard and UHF channel 36

Discussion in 'Amateur Video Production' started by Brainstorm, Sep 22, 2003.

  1. Brainstorm

    Brainstorm Guest

    Hi all,

    I have a MSI @nywhere master TVcard, and the TV channels are tuned fine, but
    I do not succeed in tuning my video channel.

    I connected the VCR with a coax cable to my PC (analog, same cable as I use
    for the connection between the TV and the cabledistribution), so the VCR
    should show up on UHF channel 36 (checked this in the manual of the VCR and
    on the VCR itself).

    I live in Belgium, so I checked PAL_B and PAL_H, but PAL_B 36 nor PAL_H 36
    show the video channel. I even tried disconnecting the VCR from the
    TVdistribution cable and played a recorded video, so the only channel to be
    found was the VCR channel, but nops...

    I noticed however that on channel 72 the video channel can be found, in very
    bad quality...

    I tried VIRTUALVCR, IUVCR and MSIPVS... What am I doing wrong?

    Or should I buy an extra cable so I can use the cinch connector?

    thx for your replys
     
    Brainstorm, Sep 22, 2003
    #1
    1. Advertisements

  2. Brainstorm

    Brainstorm Guest

    Hi,
    I bought the extra cable (cinch or "phono" connectors) and now the picture
    is OK.
    thx anyway,

    Brainstorm
     
    Brainstorm, Sep 25, 2003
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.