one more edit suite question

Discussion in 'Professional Video Production' started by Matt, Oct 31, 2005.

  1. Matt

    Matt Guest

    Ok... Like I said in my last post, I'm currently shooting with a Sony PD-150
    and hope to upgrade to something like a Sony HVR-Z1U by the end of the year.
    My old edit suite just bit the dust and I'm looking to replace it as fast as
    possible. Based on my last post it looks like I can just go with Premiere
    Pro and a firewire card, but I'm currently in a position where I need to
    master back to BetaSP (more specifically a UVW-1800). Not to mention that
    I'd like to have a way to bring audio into the system via my Mackie 1202. My
    total budget for the system can't go over $10,000 so does anyone have any
    suggestions for a way to output to BetaSP as well as bring audio in from a
    source other than firewire for a decent amount of money? Or should I just
    start looking at more of a turn key system for my needs?
     
    Matt, Oct 31, 2005
    #1
    1. Advertisements

  2. Matt

    :::Jerry:::: Guest

    Have you looked at / considered the Blackmagic-Design range of I/O
    boards?

    http://www.blackmagic-design.com/
     
    :::Jerry::::, Oct 31, 2005
    #2
    1. Advertisements

  3. Matt

    Matt Guest

    Someone else just sent me a link to that site... do you or do you know
    anyone that has any experience using their products? I've tried calling some
    of their local reps but they just don't seem to know very much about the
    product.
     
    Matt, Oct 31, 2005
    #3
  4. Matt

    Steve Guidry Guest

    One of my clients uses it, and is sold on it completely.

    It does have one drawback, which probably won't apply, as it deals with
    syncing it to an external system : It lacks a genlock input, making it
    impossible to use it as a source with his live studio setup. (He solved it
    by just running it through a frame sync.)

    Steve
     
    Steve Guidry, Oct 31, 2005
    #4
  5. Matt

    Matt Guest

    Thanks! That shouldn't be an issue for me.
     
    Matt, Oct 31, 2005
    #5
  6. Matt

    gavf Guest

    Matt

    Not sure whether Canopus eidus set will allow this configuration, won't any
    card Matrox, canopus etc allow you to input from BETA / analogue audio???

    Ta -GavF
     
    gavf, Oct 31, 2005
    #6
  7. Matt

    Bill Fright Guest

    Since you're doing some planning you might as well work the time code
    angle too. Matrox can support time code with a third party card but you
    might like this one better.

    http://www.datavideo.us/products/dac_30_main_page.htm


    Hope that helps.
     
    Bill Fright, Nov 3, 2005
    #7
  8. Matt

    Matt Guest

    Thanks! I looked at the 10 and the 30 originally but then I decided that I'd
    like to add Boris Red to the software mix and that sort of blew my budget a
    little out of the water. I should just be mastering back to an UVW-1800 for
    distribution to TV stations so I think I can get by with crash recording
    into it from my system. And hopefully I won't need to grab any footage from
    it at all.
     
    Matt, Nov 3, 2005
    #8
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.