pulling tmax 3200 to 400

Discussion in '35mm Cameras' started by Jan Keirse, Apr 26, 2005.

  1. Jan Keirse

    Jan Keirse Guest


    I've got a friend who accidentally exposed a kodak tmax3200 film at iso 400.
    Since we had quite high expectations about the photographs we wondered if anyone
    knows how this can be properly developed so that at least something is left from
    the photographs.

    We have Tmax and D76 developer available.

    Thanks for any suggestions,

    Jan Keirse, Apr 26, 2005
    1. Advertisements

  2. Jan Keirse

    Paul Rubin Guest

    It's not that big a deal, TMZ is really an ISO 1000 film with an
    overdevelopment prescription for shooting at 3200. You're looking at
    just over a 1 stop pull from the natural speed. I'd say look at the
    data sheets, but there's a film-and-labs newsgroup that is probably
    a better place to ask.
    Paul Rubin, Apr 26, 2005
    1. Advertisements

  3. Take another roll first, as a test, and try this: Use Microdol-X
    straight and develop for about 10 minutes at 68F. Develop half the roll
    (leave the tongue out after, don't rewind all the way) and see how it
    looks when printed. Do not develop the 'good' roll until you have done
    this, otherwise you could be SOL.
    uraniumcommittee, Apr 27, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.