Question about Nikon D50 burst mode

Discussion in 'Nikon' started by RichA, Sep 4, 2006.

  1. RichA

    RichA Guest

    If you fire off a full burst (whatever that is) from a D50, how long
    does it take to read the image into the card? Figure HQ or Fine JPEGs.
     
    RichA, Sep 4, 2006
    #1

    1. Advertisements

  2. RichA

    Rudy Benner Guest

    I can shoot roughly 9 frames then the buffer fills up and it takes a bit
    longer. In raw mode, I can get 3 before the buffer fills.
     
    Rudy Benner, Sep 4, 2006
    #2

    1. Advertisements

  3. RichA

    Ed Ruf (REPLY to E-MAIL IN SIG!) Guest

    Ed Ruf (REPLY to E-MAIL IN SIG!), Sep 4, 2006
    #3
  4. RichA

    Tom Guest

    RichA wrote
    Google knows:

    *2.5 Frames Per Second with Uninterrupted Shooting up to 137 Frames:*
    High-speed continuous shooting assures uninterrupted shooting up to 137
    frames*, while shutter speeds from 30 to 1/4,000 sec., and flash sync
    speeds up to 1/500 sec. provide the capability to capture images not
    possible with non-SLR type cameras. /*When using JPEG NORMAL - Large
    settings, and a SanDisk Ultra II SD Card (256MB). The number of
    continuous shots possible in a single burst may be fewer depending on
    the type of SD card used./
     
    Tom, Sep 8, 2006
    #4

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Nikon D50 Burst mode

  2. Action for Sony 828 Burst mode images into layers

  3. D50 Nikon bulb mode

  4. Quality of pics using Burst Mode ?

  5. DX6490 Burst Mode Question

  6. burst photography question

  7. CHDK [was: Camera with ultra-slow burst mode?]

Loading...