Question on Infra-Red with Nikon D-70 by jeffrey dach

Discussion in 'Nikon' started by radio_1776, Apr 2, 2007.

  1. radio_1776

    radio_1776 Guest

    Infra-red photography with Nikon D-70, Canon, Pentax or Fuji?

    And is this the recommended method for the D-70?

    Infrared filter Wratten 89B, Hoya R72.

    Adjust white balance for digital infrared photography with the Nikon

    By taking a photo of green grass at midday in full sun which fills

    Use white balance preset from menu, select white balance, >preset> use
    photo>select image> use your control dial to navigate to the image of
    the grass.

    Menu should now say "this image>set." Now is the camera is ready to
    shoot infrared? Any other presets to adjust? Adjusted for drdach

    thanks very much from jeffrey dach
    radio_1776, Apr 2, 2007
    1. Advertisements

  2. radio_1776

    Annika1980 Guest

    You'll need to adjust the exposure. A lot.
    Annika1980, Apr 2, 2007
    1. Advertisements

  3. radio_1776

    Nervous Nick Guest

    This might help:
    Nervous Nick, Apr 2, 2007
  4. Since you're outside the visible spectrum, adjusting WB does not
    make sense. Shoot RAW.
    Exposure may be tricky. Meter through the filter and bracket wide.
    Gisle Hannemyr, Apr 2, 2007
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.