Setting paper size in Kodak EasyShare

Discussion in 'Kodak' started by Simon Caldwell, Dec 21, 2003.

  1. I'm using Kodak UPP paper size 5x7 inches.
    The instructions say that to print, I should first choose 5x7 (or
    13x18 cm) from the paper size list.
    However, I don't get this option, only US letter, A4, A5, and Legal.

    Any clues what I should do? If been using the usual trial-and-error
    technique but this is costing me a lot in wasted paper!

    It's a Canon S450 printer if that makes any difference.

    TIA

    Simon
     
    Simon Caldwell, Dec 21, 2003
    #1
    1. Advertisements

  2. Simon Caldwell

    gudgeon Guest

    A5 is half A4 (foolscap) size -- about 6 3/4in by 4 3/4in.
     
    gudgeon, Dec 22, 2003
    #2
    1. Advertisements

  3. The software asks the printer about the available paper sizes and only
    displays those that the printer says are available. Somehow the printer is
    telling EasyShare software that 5x7 is not available. Perhaps the printer
    is installed incorrectly?

    This is strange though, if the printer accepts 8x11 it shoudl certainly
    accept 5x7.
     
    William Jackson, Dec 22, 2003
    #3
  4. Simon Caldwell

    Peter James Guest

    Does the software offer a "Custom" size. If so, you can specify
    whatever size of paper you want.
     
    Peter James, Dec 22, 2003
    #4
  5. Simon Caldwell

    daleok Guest

    I ran into the same problem with my printer which is an I550. Check the
    paper settings for the printer. When you change it to 4X6 or whatever you
    need, it will then show up in the EasyShare program.
     
    daleok, Dec 27, 2003
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.