Sony Alpha's anti-dust and DR comp = NG?

Discussion in 'Sony' started by RichA, Aug 12, 2006.

  1. RichA

    RichA Guest

    1. Advertisements

  2. RichA

    G.T. Guest

    G.T., Aug 12, 2006
    1. Advertisements

  3. RichA

    Bill Guest

    The anti-dust "shake" techniques are very ineffective at best, and a
    marketing gimmick at worst.

    If you want a clean sensor, you have to take steps to clean it manually
    (just like it says in the manual for the Olympus cameras).
    Bill, Aug 12, 2006
  4. RichA

    Frank B Guest

    I had an Olympus E300 and then an Olympus E500 and found the dust
    removal system to be very effective. I never had to clean the sensor.
    Frank B, Aug 12, 2006
  5. RichA

    G.T. Guest

    Did you ever bother checking the sensor? Thought not.

    G.T., Aug 12, 2006
  6. RichA

    RichA Guest

    At best it buys you some extra time.
    RichA, Aug 12, 2006
  7. RichA

    Bill Guest

    But that doesn't really mean anything.

    Have you done a small aperture test image to see what's on the sensor?

    If so, perhaps you had a clean sensor to begin with and haven't made it
    dirty, just like my Rebel XT. It was very clean when I bought it, and
    I've only had to do very basic maintenance to keep it clean.

    My friends D70s which I use a lot was spotless and has never needed more
    than a blower to keep it clean. His D200 was 100% when he bought it, and
    so far he hasn't had a need to touch the sensor.

    Some people obsess over a clean sensor, while the smart ones get out and

    Bill, Aug 12, 2006
  8. RichA

    Alan Browne Guest

    If you don't change lenses often,
    If you don't check for dust (small aperture, oof, light BG)

    then it isn't put to the test.

    Don't top post.

    Alan Browne, Aug 12, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.