Stupid questions about a Gossen Luna-Pro F Digital meter

Discussion in '35mm Cameras' started by Scott, Sep 18, 2003.

  1. Scott

    Scott Guest

    Hello,

    I just bought a used Gossen Luna-Pro F Digital meter and I have a couple of
    stupid questions for you experts out there...

    1) Is there any sort of battery check on this meter? I don't see one when
    scrolling through the functions nor is there one on the display.

    2) On the right-hand side of the display, there are a couple of little letters
    that appear depending upon the exposure selected, or so it seems. One is an "s"
    and the other is an "m," and they appear alternately. For example, if I select
    a really long shutter speed (i.e., several seconds) the "m" appears. Otherwise
    the "s" is displayed. What do these mean?

    I've pretty much figured the rest of the stuff on this little guy out, but
    these two things have me stymied.

    Thanks. I appreciate any help you can give.
    Scott
    This posting was written using 100% recycled words
     
    Scott, Sep 18, 2003
    #1
    1. Advertisements

  2. Scott

    Dld2419 Guest

    1. Advertisements

  3. Scott

    Alan Browne Guest

    I believe the display should be:
    blank: fractions of seconds
    s: second(s)
    m: minute (s)
     
    Alan Browne, Sep 18, 2003
    #3
  4. Scott

    Scott Guest

    Scott, Sep 18, 2003
    #4
  5. Scott

    Scott Guest

    I believe the display should be:
    Thank you very much, Alan. I appreciate it.

    Scott







    *** This posting was written using 100% recycled words ***
     
    Scott, Sep 18, 2003
    #5
  6. Scott

    Scott Guest

    Thanks. It appears to be working fine, so I suppose the battery's good.

    Thanks again,
    Scotty







    *** This posting was written using 100% recycled words ***
     
    Scott, Sep 19, 2003
    #6
  7. I always find it hard to remember which Gossen meteris called what in the
    U.S., but i believe the Luna Pro-F Digital to be the Sixtomat Flash, right?
    There will appear a battery warning signal (the word "BAT" in a box) in the
    display of this meter when the battery is running low. The "active" test you
    can do is see if this signal appears whenusing the thing. No button to press
    except the ones for normal operation.

    As long as other things appear too on the display, there is still some power
    left in the battery, but not much. When "BAT" is the only thing on the
    display there is no power left.
     
    Q.G. de Bakker, Sep 19, 2003
    #7
  8. Scott

    Alan Browne Guest

    ....except enough to display BAT?
     
    Alan Browne, Sep 19, 2003
    #8
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.