Syd : Where do you service your cameras [Nikon] ?

Discussion in 'Nikon' started by [BnH], Nov 26, 2003.

  1. [BnH]

    [BnH] Guest

    As per topic said.
    Maxwell is too far from my place n workplace :(

    Any other place that's honest, trustworthy an skillful ?

    =bob=
     
    [BnH], Nov 26, 2003
    #1
    1. Advertisements

  2. [BnH]

    PeteZ Guest

    =bob=

    I have been using Maxwells out in Ryde up until they moved recently (to
    Lidcombe) to get CCD, re-rubbering jobs and lens servicing.

    To find one closer to Sydney CBD would be great.

    (I'm watching for responses !)

    - peteZ
     
    PeteZ, Nov 26, 2003
    #2
    1. Advertisements

  3. try VIVID on the first floor above the State Theatre (State Theatre
    office block) in Market St. Resa (the repair guy is triffic with fault
    finding and repair....his prices are reasonable as well...the only
    downside is his volumn of work which makes turnaround a bit longer than
    others.
    s
    --

    sam bienstock

    e-mail:
    web: home.iprimus.com.au/samcomet
    icq: 36276096

    Comet Lighting
    5 Ramsay St.
    Haberfield, N.S.W.
    2045, Australia

    ph. +61 (0) 2 9716 6093
    ph. +61 (0) 428 249 172
    fax +61 (0) 2 9799 8930

    agency: Top Technicians
    ph. +61 (0) 2 9958 1611
    fax +61 (0) 2 9967 2408

    ------------------------------------------------------------------------

    debby michels

    e-mail:
    web: www.rprconsulting.com.au

    RPR Consulting
    349 Annandale St.
    Annandale, N.S.W.
    2038, Australia

    ph. +61 (0) 2 9555 2759
    fax +61 (0) 2 9810 8001
     
    Bienstock/Michels, Nov 26, 2003
    #3
  4. [BnH]

    [BnH] Guest

    This guy Sam ?

    ADDRESS
    Level 1/ 49 Market St
    Sydney
    NSW, 2000
    Australia

    Ph: (02) 9261 4408


    I'll try visiting them next week for a quote to fix my 80-200.

    Thx.

    =bob=
     
    [BnH], Nov 26, 2003
    #4
  5. bob,
    yes sir that's him...again a really nice friendly fella, & his anacdotal
    knowledge of faults seem boundless.....he also guarantees his work for a
    year. the only downside is the turnaround time. I have tried Whilton's in
    'Liz St. cbd opp the park, but i'm not all that convived of their quality.
    their turnaround time tho is fast. hope this helps!
    cheers,
    sam




    --

    sam bienstock

    e-mail:
    web: home.iprimus.com.au/samcomet
    icq: 36276096

    Comet Lighting
    5 Ramsay St.
    Haberfield, N.S.W.
    2045, Australia

    ph. +61 (0) 2 9716 6093
    ph. +61 (0) 428 249 172
    fax +61 (0) 2 9799 8930

    agency: Top Technicians
    ph. +61 (0) 2 9958 1611
    fax +61 (0) 2 9967 2408

    ------------------------------------------------------------------------

    debby michels

    e-mail:
    web: www.rprconsulting.com.au

    RPR Consulting
    349 Annandale St.
    Annandale, N.S.W.
    2038, Australia

    ph. +61 (0) 2 9555 2759
    fax +61 (0) 2 9810 8001
     
    Bienstock/Michels, Nov 26, 2003
    #5

  6. Which Nikon? Poraday in Bondi do them as well - not sure about later
    models, but they have done an F3 and F2AS for me, recommended by
    Maxwell actually.

    Come to think of it, they must also do the later models, as I was told
    that only one technician knew how to service these models, so there
    might be a wait; which infers no unreasonable wait for later models?
     
    Flatulent Dingo, Nov 28, 2003
    #6
  7. [BnH]

    rb Guest


    Poraday Pty Ltd
    Unit 6/ 195 Bondi Rd Bondi 2026
    (02) 9387 4088
     
    rb, Nov 28, 2003
    #7
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.