Tri-X Pan Pro & Rodinal dev times?

Discussion in 'Darkroom Developing and Printing' started by thigmo, Jul 13, 2003.

  1. thigmo

    thigmo Guest

    Hi all,

    I've looked and looked but can't seem to find any developing info for this
    combination of film and developer. I've exposed a couple rolls of 120 at
    320 Tri-x pan pro (not regular Tri-X/TX 400) and all I've got on hand is
    Rodinal. Any experience with the combination (and potential push times)
    would be greatly appreciated.

    Thanks,
    thigmo
     
    thigmo, Jul 13, 2003
    #1
    1. Advertisements

  2. thigmo

    John Guest

    Rodinal is not a good developer for pushing and in fact will not give you
    an EI 320 with TXP. EI 200 maybe. I'd try 1:50, 12 minutes at 70F.


    Regards,

    John - Photographer & Webmaster - http://www.darkroompro.com
    A summation of American society after 9/11:
    Never have so many known so much and yet done so little.
     
    John, Jul 13, 2003
    #2
    1. Advertisements

  3. Subject: Tri-X Pan Pro & Rodinal dev times?
    ///////////////////////////////////////////////////////////////////////////

    For general pic's people, homes neighborhoods, etc. I would recomend shooting
    the TXP @ 250 rather than 320. I normally develop TXP (@250)
    1+85 dilution for 17min @ 68f. I would start with 18min 68f with the first roll
    and see how it comes out. Then procede with the others with corrections to
    your time you may feel necessary.

    I normally prefer TX it seems to handle the highlights better out of doors.

    Regards.

    Bob McCarthy
     
    TheYankeeSnapper, Jul 13, 2003
    #3
  4. I always use Rodinal at 1:25, and 6min with standard agitation and
    68deg temp will give excellent results.

    HM
     
    Herr Mercedes, Jul 14, 2003
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.