Using SB-800 to trigger other SB-800 using D1 cameras

Discussion in 'Digital Cameras' started by [BnH], Sep 24, 2005.

  1. [BnH]

    [BnH] Guest

    Hi all,

    I been in and out a few forums, read the manual but seems can't figure out
    how to trigger other SB-800 using the SB-800 mounted on top of my D1H and S2

    Is it impossible to do without a SU-4 ? or I read the wrong section of the
    manual ?


    [BnH], Sep 24, 2005
    1. Advertisements

  2. [BnH]

    [BnH] Guest

    Its done.
    A further googling around reveals that SU-4 is actually BUILT into the
    SB-800 now :p
    I really have no idea what's the difference between the slave on the SB-26,
    SB-30,SB-80DX I have
    [and if they are no different , why they name that mode SU-4 now :D]

    anyway just set it to SU-4 mode and you are set to go :)
    its not actually CLS, but it'll do til I upgrade to a new body.

    [BnH], Sep 24, 2005
    1. Advertisements

  3. Set them both to SU-4 in the custom menu.

    Walter Hofmann, Sep 24, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.