WANTED: Omega D-2 Lens Cone and Lens disc 421-102 421-008

Discussion in 'Darkroom Developing and Printing' started by happyheathen, Nov 8, 2004.

  1. happyheathen

    happyheathen Guest

    Hi -

    Sorry to clutter this board, but:

    I need the 4 1/2" lens cone for the D-2, and the lens disc for 50mm
    mount. If the part numbers appear (they don't always) they are 421-102
    and 421-008.
    I want these to use with the Componon-s 150mm lens.

    Appearance not important - I can refinish them if needed - they just
    need to be straight and light-tight.
    If you have either and/or both, please drop me an email at:
    (bushy_hare 'at' yahoo.com)

    happyheathen, Nov 8, 2004
    1. Advertisements

  2. happyheathen

    Mike King Guest


    This cone is not a very common item used, Harry might be your only source,
    he has new ones that were custom made for him. Or do what I did and make an
    extension ring. I used the top to a can of spray paint, cut the top out and
    attached the lensboard to the cone with longer screws using the lid as a
    spacer. The lip on the can lid fit perfectly in the hole in the cone. Also
    worked great for making reductions with the 135mm lens on the same cone.

    You might also post to rec.photo.marketplace.darkroom

    and http://www.khbphotografix.com/omega/
    Mike King, Nov 8, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.