Warning about Kingston SD memory cards

Discussion in 'Digital Cameras' started by Sheldon, May 21, 2005.

  1. Sheldon

    Sheldon Guest

    I just got a Kingston SD memory card and was having trouble getting it into
    my multi card reader, plus it was a bit tight in the camera as well. Turns
    out Kingston put their own sticker on a Toshiba SD card, and the sticker
    makes the card just thick enough to cause minor problems. Just peel off the
    sticker and it slides right in. Otherwise, the card works just fine, and
    was much cheaper than the other brands I was looking at. There is an indent
    for a sticker, but this sticker is much larger.

    Hope this helps anybody who thinks their SD card is a tight fit. At first I
    thought I was going for the wrong slot in the multicard reader.
    Sheldon, May 21, 2005
    1. Advertisements

  2. Sheldon

    ASAAR Guest

    Tight fit, wrong slot or both? :)
    ASAAR, May 22, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.