Weird Video Capture Problem With New ATI Catalyst Drivers

Discussion in 'Amateur Video Production' started by Agent_C, Aug 2, 2006.

  1. Agent_C

    Agent_C Guest

    I just updated the drivers on a ATI All-In-Wonder 2006 PCIe to the
    Catalyst 6.7 drivers. (Filename = 6-7_xp-2k_dd_ccc_wdm_enu_34826.exe)

    When selecting a recording present in Multimedia Center TV (version
    9.14), the resulting video clip does not match (or render as) what was
    selected.

    Example:

    - Selected a present with 320x240 resolution: http://tinyurl.com/zlgk2

    - Resulting clip is actually 320x480: http://tinyurl.com/hao9h

    This is frustrating the hell out of me, as I never wish to make a
    video clip with this odd resolution; and at the low bit rate I use for
    these clips, it looks like crap. I've combed through all the possible
    settings in MMC and can't seem to stop this behavior.

    Assistance greatly appreciated,

    A_C
     
    Agent_C, Aug 2, 2006
    #1
    1. Advertisements

  2. Agent_C

    Dr_F Guest

    I'm having the same problem. 640x480 settings result in 640x960 video.
    The vertical resolution seems to be doubled no matter what. The only
    solution seems to be reverting back to an older version of software.
     
    Dr_F, Aug 5, 2006
    #2
    1. Advertisements

  3. Agent_C

    Agent_C Guest

    Indeed... I had to back-rev to Catalyst 6.5 / MMC 9.13 in order to
    alleviate the problem.

    I have a ticket opened at http://support.ati.com - You should do the
    same.

    A_C
     
    Agent_C, Aug 5, 2006
    #3
  4. Agent_C

    Dr_F Guest

    I got this from ATI Support:

    Solution: There is an issue with Catalyst 6.6 and above capture
    drivers. Till this is resolved, please reinstall the Catalyst 6.5
    driver package.
     
    Dr_F, Aug 24, 2006
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.