What hapen ?

Discussion in 'Digital Point & Shoot Camera' started by Alf92, Sep 7, 2005.

  1. Alf92

    Alf92 Guest

    Alf92, Sep 7, 2005
    1. Advertisements

  2. I assume that you have tried another storage card and have removed, and then
    replaced all batteries (don't know if your camera uses one or two) and thus
    must assume that your camera is broken. Sorry!
    Charles Schuler, Sep 7, 2005
    1. Advertisements

  3. Alf92

    The PhAnToM Guest

    Looks like a bad CCD, either the chip array itself or the way it's
    being read out. Take a dark image (with the lens cap on, or some other
    sufficient covering so the light doesn't get in) and then adjust gamma
    or contrast (with PhotoEditor or whatever applicable software) to bring
    out the noise and see if you get the same pattern.
    The PhAnToM, Sep 7, 2005
  4. Alf92

    Alf92 Guest

    The PhAnToM a dit ├ža :
    There is no problem when I use the video mode.
    the problem is only in photo mode.
    then I don't think it is a CCD problem...
    another idea ? :)
    Alf92, Sep 8, 2005
  5. Alf92 wrote:
    Video mode may not use all the pixels in the array.

    Try restting all the camera settings - is there a menu function for this?
    Can you leave the batteries out for 48 hours? Reflash the camera's

    David J Taylor, Sep 9, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.